Pond Heating » Filtertech Digi-Stat Contollers

FilterTech Digi-Stat Controller

The FilterTech Digi-Stat controller is designed to give accurate and automatic temperature control for Koi ponds.

Operating in the range of 5 to 30 degrees Celcius this highly accurate stat will hold water temperature within +/- 0.1 degree Celcius.  The unit is programmed with an automatic temperature gradient control which eliminates temperature shock for the fish when changing settings.

The FilterTech Digi-Stat contoller unit can operate most boilers, motorized vavles and electric heaters up pto 3kw.  A large clear display and single button make this a very user friendly thermostat.  The unit also features a water level sensor option which cuts off the heat source at low water level and a remote alarm option to give warning of any faults.

FilterTech Digi-Stat Specifications:

• Display 3 Digit LED
• Resolution - 0.1 degrees C
• Temperature probe Tolerance - + 1%
• Display Range - 0.0 degree C to 40.0 degree C
• Set Temperature Range - 5.0 degree C to 30.0 degree C
• Programmed Temperature Rise Rate - 2 degrees C per day (maximum 1/2 degree per 6 hours)
• Programmed Temperature Fall Rate - 1 degree C per day (maximum 1/2 degree C per 12 hours)
• Heater Circuit Switching Capability - 3kw 230 volt maximum
• Enclosure Rating - IP56
• Temperature Probe Sensor Lead - 5 mtrs
• Water Level Switch Lead - 5 mtrs