 The new Multi Cyclone Solids Remover is an innovative pre-filter device that is both capable of saving water and reducing filter maintenance. The Multi Cyclone device works in the principal of centrifugal water filtration, with no moving parts and no filter media to clean or replace. These 'plug and play' devices will provide years of maintenance free service.
The multi Cyclone is best suited and designed as a pre-filter, which in turn can be extend the life of your existing filter by reducing it's workload as well as cutting water consumption.
How Does it Work?
Incoming water enters, via the inlet at the base of the unit, the water then passes through 16 hydro cyclones tangentially generating a strong centrifugal flow within the unit. The sediment is then spun to the sides of the Hydro Clones walls where it then spirals it's way down to the sediment collection bowl.
The now filtered water migrates itself towards the centre of the Hydro Clone where the water flow reverses and then spirals upwards through the outlet at the top of the device. Due to the Multi Cyclone's clear sediment bowl the accumulation of sediments is visibly easy to monitor, when cleaning is required simply open the 25mm sediment valve and flush to waste, this procedure takes seconds and only uses 15 litres of water.
Product Features:
- Innovative Centrifugal Water Filtration
- No Filter Media to clean and maintain
- Simple Installation
- Clear Sediment Collection Bowl
- 2 year Warranty
The filtration efficiency of the Muli-Cyclone was tested by feeding 5 to 80 micron dust particles through the Multi-Cyclone and analyzing the percentage of dust particles trapped in the sediment bowl. Laboratory tests revealed that the Multi-Cyclone was effective at filtering particles sized 40 to 80 microns. |